Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Dwayne Cyr

Pages: 1 [2] 3 4 5
21
Optics / Weaver 36X SOLD!
« on: September 16, 2020, 04:30:19 PM »
Have two, selling one and keeping the other for a spare.

Black, fine cross hair, no ring marks

Silver, 1/8th dot, slight ring marks.

Your choice

$400 plus shipping and insurance

EMT preferred

SOLD!

22
BRSC - Benchrest Shooters Canada / Kenora 100 Meter Score Match Report
« on: September 14, 2020, 10:05:55 AM »
Kenora 100-meter Score Match

Lake of the Woods Gun Club in Kenora hosted a sanctioned 100-meter score match Sunday September 13th, 2020. The weather was cool, and conditions were tricky.

Phil Nick's range record of 250 - 14X fell. Targets will be submitted to the Scoring Committee for consideration of a pending Canadian record in BRSC Heavy Varmint for Score Class.

Tory Phin shot superbly on his 4th target scoring 50 - 5X with a 6ppc in tricky conditions.

Thanks to the out of towners for making the trip to support our range. And thanks to all the volunteers including target crew, scorer, referees, and RSO's who make these matches happen.

Dwayne Cyr



23
BRSC - Benchrest Shooters Canada / Kenora Score Shoot
« on: August 31, 2020, 05:29:44 AM »
Lake of the Woods Gun Club in Kenora hosted our inaugural BRSC registered 200-meter score match Sunday August 30th, 2020.

The swirling wind was brutal. One flag disappeared; 2 daisy flags got strangled by their tails. Some flags were spinning with the tails straight up.

Congratulations to winner Phil Nick who used an 8 twist 6br with 108 Berger's.

Thanks to the out of towners for making the trip to support our range. And thanks to all the volunteers including target crew, scorer, RSO and barbeque chef. Special thanks to Ron McDaniel for crafting the custom wood box to protect the scale.

Dwayne Cyr

24
BRSC - Benchrest Shooters Canada / Re: 2020 SBRSProvincial Results and match report
« on: August 18, 2020, 01:14:39 PM »
Congratulations to Hugh, he's a class act and he will always take time to help you.
Overall I'm happy with my standing at the end of the event, considering I have not shot bench rest since August 2019.
Thanks to Chelsey, Grant and Calvin for running a good match and thanks to the Alberta boys for the tough competition.


25
BRSC - Benchrest Shooters Canada / Re: Kenora 2020 Schedule
« on: August 17, 2020, 05:01:12 AM »

Lake of the Woods Gun Club in Kenora will host a 100-meter Heavy Varmint for Score match Sunday September 13th.
Any questions contact Dwayne Cyr dwayne_cyr@sympatico.ca.

26
Centerfire Discussions / Re: 15 or 20 MOA Rail
« on: July 06, 2020, 06:40:05 AM »
You do understand the rail is machined into the top of the receiver?

Replacing it with a 20 moa rail is not an option.

27
Centerfire Discussions / Re: 15 or 20 MOA Rail
« on: July 05, 2020, 03:36:53 PM »
Found 2 solutions:

Kelbly's make a set of 30 mm rings with 25 MOA of elevation built in.

Stiller used to make a set of 1 inch rings with 20 MOA that need 4.5" of spacing.

The 30mm scope that's on the gun has 50 MOA of elevation travel so I'm going to try dialing in elevation to get zeroed at 500 meters.

The load needs 11" of elevation at 100 for a 500 meter zero. If the scope runs out of elevation, I'll get the rings. 

28
Centerfire Discussions / 15 or 20 MOA Rail
« on: July 02, 2020, 01:54:35 PM »
On short range bench rest actions with 3/8" Davidson style rail, how do you add 15 or 20 MOA to shoot 600 yards?

Are there rings that do this?

Thanks

Dwayne


29
Stinger Ballistics / Re: 30 cal. Killer Bee's
« on: May 11, 2020, 07:30:28 AM »
"I just want to give a shout out to Wally for the great service. The bullets are packaged very nicely and the service was second to none. Thank you."

X2

30
BR Equipment + Components / WTB Stock
« on: March 13, 2020, 12:15:19 PM »
Wanted to buy:

Hunter Benchrest stock with 2 1/4" wide flat fore end inletted for Remington 700 short action.

Thanks

Dwayne

31
BR Equipment + Components / Re: WTB 30br brass
« on: January 07, 2020, 12:10:01 PM »
Don't have .30 br brass but just received a blue box of 6.5 Grendel brass that I will be necking up to .30 for a wildcat called .30 Major.

It has a 6ppc case head, its 1.515" long and it looks like a 6ppc that's .070" longer base to shoulder.

It does everything the .30 br does and I don't have to open the bolt face, buy a new bolt or rebate rims. Just neck up, turn the necks and shoot.

It uses an off the shelf Redding 6.5 Grendel Type S die with the hole under the bushing opened a little and a Wilson .30 cal blank is chambered with my reamer.

My HV has sentimental value and I would rather do it this way.

32
Centerfire Discussions / Re: custom bullets?
« on: September 12, 2019, 05:47:43 AM »
Check your pm.

33
Optics / Sold Leupold BR Scope
« on: September 03, 2019, 01:40:30 PM »
Sold 36X Leupold with Target dot, 1" tube and sunshade. Front parallax adjustment and black.

$450 shipped

Contact   dwayne_cyr@sympatico.ca




34
BRSC - Benchrest Shooters Canada / Re: Selkirk Benchrest Shooters 2019 Provincials Results
« on: August 12, 2019, 06:26:21 AM »
Thanks Dan

Did anybody ever tell you that you are an excellent sports commentator? I really enjoyed reading your reports of the World's  Championships.

35
Centerfire Discussions / Re: Tuners?
« on: June 20, 2019, 07:26:37 AM »
I used a tuner for 1200 rounds on a LV 6ppc. it was a Gene Beggs style tuner from Paul Becignuel.

I didn't use it properly and it drove me nuts.

36
Centerfire Discussions / Re: Tested a old load from 70s in .308win 40xb
« on: April 17, 2019, 05:21:33 PM »
Is that IVI military brass?



37
BR Equipment + Components / WTB Barts Bullets
« on: March 29, 2019, 07:39:37 AM »
Does anybody have 65 grain Barts boat tails for sale?

Thanks

Dwayne

38
Rifles / Re: Wts stolle panda left bolt right port 6ppc in Larson cedar canon stock
« on: February 26, 2019, 08:44:25 AM »
Sad day. I hope the fishing bug isn't contagious.

39
Centerfire Discussions / Re: I need to send 3 spent brass to Harrell's precision... but I'm in Canada.....
« on: December 27, 2018, 06:35:06 AM »
Hi Rod

Thanks for taking the time to give your advice and share your knowledge. I printed it off and saved it as reference material in my binders. There were a couple of important clues that explain what's going on.


Dwayne

40
Hugh Williamson Precision / Re: Real World Results With HWP Barrels
« on: October 16, 2018, 06:31:27 AM »
Grooves?

Cut or buttoned?

Thanks

Pages: 1 [2] 3 4 5
SMF spam blocked by CleanTalk