Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - danyboy

Pages: [1]
1
BR Equipment + Components / WTB Edgewood rear bag
« on: November 20, 2023, 05:57:02 AM »
Looking for an Edgewood rear bag.

2
Centerfire Discussions / Re: Shade Tree Coax top modification
« on: November 02, 2023, 07:10:22 PM »
Excuse the 13 year delay but I just bought a Shadetree rest top and wish I had read your topic before. After reception, I installed it on my Sinclair base 3/4" shaft) which, I was told byShadetree would fit and it did. On,y problem; the top of the top wobbles and when trying to move the joystick up or down, the sides didn't move together, one side moved faster than the other.
 I contacted the company and the told me to screw off the tension screws, remove the top and reinstall it on its Shadetree restop base. I did, nothing changed. I decided to screw the tension screws evenly till I felt about the same resistance and it worked BUT joystick was stiffer to move.
 I have never bought something that didn't work and that the company tells you to disassemble part of it and reassemble it to make it work. On top of it, joystick is right under the rifle forend and parallel to it ! I am considering bending it so my left hand doesn't have to be right under the forend.
 With the exchange and shipping it came up to over $600 CAD. Not impressed.

3
BRSC - Benchrest Shooters Canada / Mitchell bullets ?
« on: September 26, 2023, 07:27:38 AM »
Anybody knows if it  is still possible to get Mitchell 118gr. FBHP bullets ?

4
Optics / Re: $300.00 Leupold 24X, Cross hair
« on: August 24, 2021, 08:32:05 AM »
After leaving phone msg, pm and email, tomorrow I

5
Optics / Re: $300.00 Leupold 24X, Cross hair
« on: August 23, 2021, 12:50:33 PM »
PM sent with shipping info so you can tell me how much total and I'll send an EMT right away.
Dan

6
Optics / Re: $300.00 Leupold 24X, Cross hair
« on: August 21, 2021, 08:12:12 AM »
Still for sale ? You take EMT and ship it out ? PM sent
Dan

7
BR Equipment + Components / WTB 30BR FL die
« on: October 11, 2019, 06:47:10 AM »
Looking for 30BR FL die

8
Centerfire Discussions / .308 x 1.5 reloading info needed
« on: May 04, 2019, 07:26:02 AM »
Bought a rifle from an estate. Caliber is .308 x 1.5. Unfortunately, very little info is found about it.
Does any old timer here have any experience with this caliber and any reloading help would be welcome.

9
 Anybody ever experienced shooting this obsolete caliber , 308 x 1.5 (also known as 308 short or 308 Ackley). Can't find any info on it. Found a rifle sold by an estate. Thought 30 BR would be almost similar but BR go-gauge won't fit the chamber when trying to close the bolt.

10
Centerfire Discussions / Re: Neck size diameter
« on: June 20, 2018, 08:28:50 AM »
 I am new in benchrest. When you guys say '.001-.002' neck clearance, do you mean total (for both sides) or per side ?  Just built myself a 6BR with a Shilen Barrel that has a .272" chamber neck. Loaded case neck using brand new Lapua Brass is .270". Fired case neck is .271". I bought a Forster bump/neck sizing die and currently trying to purchase the wright size bushing. Virgin Lapua Brass neck OD is .267". 
 Would a .267" bushing be appropriate ?

Pages: [1]
SMF spam blocked by CleanTalk