Benchrest in Canada

Classifieds (Buy and Sell) => BR Equipment + Components => Topic started by: gyeomans on January 01, 2013, 04:47:20 PM

Title: WTB .30 cal BR bullets
Post by: gyeomans on January 01, 2013, 04:47:20 PM

We have a few guys in Campbell River that have .30br's but can't find good br bullets.  Anyone out there have a good source for 115-125 grainers?
Thanks
Greg

Title: Re: WTB .30 cal BR bullets
Post by: Dwayne Cyr on January 02, 2013, 06:40:12 AM

Greg

PM sent.

Dwayne

Title: Re: WTB .30 cal BR bullets
Post by: FBMAYER on January 04, 2013, 05:07:24 PM

Re. 30cal Benchrest bullets

    wlliam0168@sympatico.ca

Title: Re: WTB .30 cal BR bullets
Post by: suitty on January 17, 2013, 05:38:00 AM

Greg Bill Mitchell has 30 cal bullets . He has been making 6 mm for about 5 years now. He started making 30's for a couple of years now.give him a call 1-705-434-3113 . Good luck Suitty

Title: Re: WTB .30 cal BR bullets
Post by: gyeomans on January 19, 2013, 05:37:53 PM

thank you kindly sir, I'll give him a call.
cheers
greg

Title: Re: WTB .30 cal BR bullets
Post by: Marshal on January 24, 2013, 07:57:46 AM

I make 125gn FB 10 cal ogive, similar to Bibs, same jackets, using Detsch carbide dies, I started making them for a shooter in France. Might add a 117gn.

Marshal

Quote from: gyeomans on January 01, 2013, 04:47:20 PM

We have a few guys in Campbell River that have .30br's but can't find good br bullets.  Anyone out there have a good source for 115-125 grainers?
Thanks
Greg

Title: Re: WTB .30 cal BR bullets
Post by: gyeomans on January 24, 2013, 12:11:24 PM

If you would crank out some 117's, we would definately try them. 

At our last BR shoot, Dave D said you made a 125 but we thought that they might be a bit long for our 1:17 twists.  We do have guys with faster twist .30's that could shoot them.  I'll let them know

Greg

Title: Re: WTB .30 cal BR bullets
Post by: Marshal on January 25, 2013, 02:26:32 PM

I agree the 125s are .981+- so a 14 twist would give an SG of 1.77
the 117s with a .952 jacket should make a bullet .906 in length with an
SG of 1.41

I will make some to give a try soon as time permits.

Thanks, Marshal